Thursday, 9 February 2012


 

Introduction injection joints



Filoform injection joints for low voltage (till 4 kV), telecommunication and signalisation.

 

Filoform: your contact for injection joints!!

 

 

Over 50 years extensive experience in the production and application of injection joints and accessories. The most recent techniques and the most innovative products due to field tests and tests in our own test- and R&D-laboratory. Filoform injection joints are suitable for all common types of cable, such as (XL)PE, PE, PP, PVC and paper/lead insulated cables.

 

 

Advantages of Filoform injection joints:

 

 

  • Universal application; the injection joints can be adjusted to any situation "on the spot", also for cable repairs. Connection-, branch-off joints and cable end joints can be made with just a limited number of basic components.
  • As the resin is filled "under pressure", possible air will be driven out of the cable connection, thus allowing no spots where water or moisture can enter into the joint on the longer term.
  • Cost saving and logistic advantages due to low stock values, saving of space in your warehouse and in your service vans, and always the correct materials available for all types of cable joints.
  • Totally resistant against moisture, even when applied on wet cables.
  • Suitable for complicated connections and on bended cables or cables which are not running horizontal.

  • Environmental friendly and economical; the compact dimensions of injection joints ensure a minimal use of resin and materials.

 

 


Interested in Filoform injection joints?

We will be happy to send you a detailed installation instruction on request.

Following basic materials are required to make an injection joint:

 

  • epoxy resin or polyurethane resins

  • gauze ribbon

  • self adhesive wrap around tape

  • injection nipple

  • injection valve

  • branch-off seal (branch-off joints

  • injection pump

 

Accessories:

  • constant force springs

  • elastic butylrubber tape

  • core separator

  • velcro material

 

 

The Filoform products are under constant quality control; from raw materials untill finished product. Filoform produces and supplies all components in accordance with international standards and with the ISO 9001-2008 quality standard. The Filoform injection joints are approved in accordance with the standard DIN EN 50393 (VDE 0278-393):2006-11. 

For the individual components of injection joints, please click here