Duct sealing system FiloSeal+HD is a universal solution for sealing larger heavy cables and pipes in ducts, bore holes or transit frames.
FiloSeal+HD provides a strong support system using the hexagonal tubes which builds up like a honeycomb structure. FiloSeal+HD is suitable for sealing any cable configuration or pipes contained in one duct and also allows easy re-entry of the seal to add or remove cables or pipes as required
The Filoform duct sealing system FiloSeal+HD uses our MD+ sealant which is easily applied from a skeleton gun. The high quality, one component, flexible sealant “MD+” is based on a silicon compound that cures with air (Humidity).
After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.
FiloSeal+HD is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses strong, but flexible hexagonal tubes to support the cable and provide a strong backing for the seal
The unique design of the hexagonal tubes makes positioning and separation of the cables very simple while also providing a strong backing for the MD+ to be applied on.
If Fire resistance is required, click here for FiloSeal+HD FIRE
|Pressure resistance||< 2mm||ISO 7390|
|Pulling Force||1000 N|
|Bend Test||10xd at 45º|
|Skin over time (23°C/55% r.F.)||± 15 minutes|
|Curing||3 mm / 24 hours|
|Hardness||Shore A 30||DIN 53505|
|Tensile strength||0.8 N/mm²||DIN 53504|
|Operating temperature||+5°C to +40°C|
|Temperature resistance||-40°C to +120°C|