Kabeline 2375 GLM epoxy resin

Go Back

The Kabeline 2375 Resin has been specially developed for the potting of conductivity sensors for the alarm slipperiness system of the Dutch highway network, which is managed by Rijkswaterstaat (Ministry of Infrastructure and Water Management). This high quality resin has been used over 30 years.

The resin excels in its exceptional adhesion to stainless steel and has no shrink during or after the curing process. The Kabeline 2375 GLM resin is particularly suitable for the potting of electrical components which need a long term protection against moisture ingress and mechnical impacts.

Download product sheet
  • Excellent adhesion to stainless steel.
  • Shrink-free. 
  • Totally moisture insensitive.
  • Very low coefficient of expansion.
  • Very low curing temperature.
  • Slow curing time of +/- 24 hours
  • Very strong, hardness Shore D 84
  • High density of 1.7
  • Excellent mechanical properties.
  • Packed in transparent 2-component pack.
  • 2-component bag with the resin and hardener always supplied in the right volumes and mixture.
  • Resin which remains in the bag after mixing can be left for hardening and can be disposed of as normal waste.
Properties Unit Value
Curing time 0.1L at 23°C hours 24
Curing time 0.1L at 30°C hours 2,5
Exothermic peak 0.1L at 30°C °C 35
Density g/cm³ 1,7
Viscosity at 23°C mPas 5000 - 6000
Hardness Shore D 84
Shrink during hardening % 0
Shelf life months 18
Hardening under water ml/gas 0
Colour   grey/black
Mixing time minutes 2
Raw materials   filled epoxy resin
More Information
More information

Download: Mixing instructions

Instructions

Home page product list No
Products
Grouped product items
Sku Product Name Colour Content

Enter the quantities you want to order / request.


Keep the quantities equal to the Order unit

Order unit
Qty
80090 Kabeline 2375 GLM 550 gram anthracite 550 gram Order unit 10 pcs/carton
Products