Filofast thermoshrink joints
The Filofast joints have been developed for telecom networks, which is based on a special sealing material. This joint offers many advantages against other jointing methods existing in the market. Installation is easy, and the result is extremely reliable. Filofast joints can be used for both straight and branch connections.
| SKU | Product Name | Order Unit |
|---|---|---|
| 800270UK | FiloFast 50/50-500 | 10 pcs/carton |
| 800271UK | FiloFast 105/30-600 | 10 pcs/carton |
- Saving on installation time up to 25%
- Fewer components
- No adhesive rings or scops required
- Reliable and long lasting sealing against water penetration
- Low risk of cable damage when shrinking the material round the connection.
- Long lasting flexible seal
- Only one installation method for all cable types
- Easy to re-enter the joint if needed:
- Upon request,we can adapt the kit & componets to suit your requirements
| Criteria | Condition | Norm | Filofast joint |
|---|---|---|---|
| Visual appearance | QCTS E121 | No visible change | |
| Longitudinal shrinkage | 23+/-3°C | >5% (measured 0%) | |
| Installation | 5 – 45°C | > 10E10 ohm | |
| Intermittent environmental temp | 10 cycli | IEC 60068-2-14 | > 10E10 ohm |
| Water penetration | 7 days | IEC 60068-2-17 | > 10E10 ohm |
| Isolation resistance | 1 minute | IEC 60512-1-1 | > 10E10 ohm |
| UV resistance | 20°C/min | ISO 11358 | >2% C |
| Stress cracking | 30d 50°C | IEC 60811-4-1 B | No damage |
| Tensile strength longitudinal | 23= +/- 3°C | ISO 527 1 + 3 | 13.7 Mpa |
| Tensile strength radial | 23= +/- 3°C | ISO 527 1 + 3 | 15.8 Mpa |
| Elongation at break longitudinal | 23= +/- 3°C | ISO 527 1 + 3 | 1200% |
| Elongation at break radial | 23= +/- 3°C | ISO 527 1 + 3 | 1200% |
| Shrink parameter | 5 minutes | <5 min at 200°C | |
| Melting temperature adhesive | Ca. 80°C | ||
| Weakening point adhesive | ASTM E28 | Ca. 70°C | |
| Hardness thermoshrink material | ISO 868 | 51 ° D | |
| Brittleness | ISO 974 | Still flexible at -20°C | |
| Thermal aging | 68 hours | ISO 188 | 17,4 Mpa |
| Themal aging | 168 hours | ISO 188 | 400% |
| Die-electric strength | IEC 243 | >10 kV/mm | |
| Bonding strength adhesive | 50 mm/min | Ca. 35 N/25mm |
In all our heat shrink products, we start from the principle that the products must be reliable and as good as the cable itself. The high quality of the heat-shrinkable products, and to the detailed instructions for use comply with this principle. The large and complete range of heat shrinkable products consists of connecting, transitional and end sleeves and various products for various cable constructions. The products include all necessary materials for a perfect protection of the cable. The shrinkable products are manufactured from high quality raw materials with very high cross-linking and can be provided with an internal coating if required. Depending on the application use these internal coating consist of an adhesive layer, or a mastic layer. The production is carefully monitored according to ISO 9001.
Get in touch
Can we help simplify your cable and ducting infrastructure solution? Connect with our team today for more information and support.