Filoseal+ duct seal
Duct sealing system FiloSeal+ is a solution for sealing cables and pipes in ducts or bore holes.
FiloSeal+ is suitable for sealing several cables or pipes contained in one duct and also allows re-entry of the seal to add or remove cables or pipes as required.
| SKU | Product name | Duct diameter min-max (mm) | Maximum cable diameter in the duct (mm) | Order unit |
|---|---|---|---|---|
| 282580 | FiloSeal+ 125mm | Ø 125 max. | Ø 95 max. | per piece |
| 282590 | FiloSeal+ 200mm | Ø 200 max. | Ø 160 max. | per piece |
The Filoform duct sealing system FiloSeal+ uses our MD+ sealant which is easily applied from a standard skeleton gun. The high quality, one component, flexible sealant “MD+” is based on a silicon compound that cures with air (Humidity).
After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.
FiloSeal+ is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses a uniquely shaped foam piece which positions neatly around the cables or pipes in the duct.
The unique design of the tri-flexible foam makes positioning and separation of the cables very simple while also providing a backing for the MD+ to be applied on.
This seal is easily installed in vertical scenarios while providing the added security of ensuring no loss of components down the duct.
FiloSeal+ is suitable for sealing several cables or pipes contained in one duct and also allows re-entry of the seal to add or remove cables or pipes as required.
- Flexible, one component, adhesive and sealing compound in a cartridge – (310ml)
- Kits are complete with backing and mastic to fill an empty duct of the quoted kit size
- High levels of Gas and Water tightness
- Excellent adhesion
- Shows Fire resistance properties
- Resistant against Water, Alkaline, Chemical agents
- Resistant to, Petrol, Diesel, Ethanol, ASTM oil, LPG & Many more.
- Suitable for sealing underground cable ducts set out within the APEA ‘Blue Book’
- Resistant to Hydrogen Sulphide / Methane and many other Gases (NedLab)
- Non-corrosive
- Solvent-free
- Shock absorbing
- Non-toxic, neutral and almost odourless
- Also suitable for limiting the EX-zones during transitions (observe chemical resistance)
- Complies with 2011 NEC Articles 225.27, 230.8, 300.5(G), 300.7 (A) on Raceway Seals, and 501.15 (B)(2)
- WIMES Compliant, (3.02 2013 clause 6.4.3.2 d)
- Suitable for any shaped duct /borehole/opening
- Quick and easy installation
- A complete kit for one duct
- Seals common materials (PVC PILC)
- Suitable for renovations, can be installed retrospectively
- Over 25 years of operational experience
- Thames Water Approved
- Welsh Water Approved
- Severn Trent Water Approved
- Southern Water Approved
- Anglian Water Approved
- South East Water Approved
- Yorkshire Water Approved
- Bournemouth Water Approved
- Scottish Water Approved
Kits are complete with backing and mastic to fill an empty duct of the quoted kit size.
| Density | 1.2 gr/cm³ | |
| Flow | < 2mm | ISO 7390 |
| Colour | red-brown | |
| Skin over time (23C/55%RH) | ± 15 minutes | |
| Curing | 3 mm / 24 hours | |
| Hardness | 30 shore A | DIN 53505 |
| Elongation | 100% | DIN 53504 |
| Tensile strength | 0.8 N/mm² | DIN 53504 |
| Operating temperature | +5°C tot +40°C | |
| Temperature resistance | -40°C tot +120°C |
Filoseal+ disclaimer
Get in touch
Can we help simplify your cable and ducting infrastructure solution? Connect with our team today for more information and support.