MD1-FttH multi duct – combination
The FILOform MD1-FttH multi duct is designed for gas and watertight sealing of FttH home entries with a maximum of 4 subducts and cables.
The sealing cap can be applied to the wall by using the special anchoring pin. This way it is not necessary to drill additional holes and to secure the cap with screws.
A gas and watertight seal is created with use of Filoform expanding PU resin type 2234. The resin package contains the right amount of resin to secure an optimal sealing. After mixing the resin and filling the cap it will start expanding. Within 30 minutes the resin will fully cure intro a stong and durable seal. Any irregularities or damage to wall will be restored by the resin.
| SKU | Product name | Diameter microduct/cable | No. of microducts/cables | Diameter bore hole | Maximum cable diameter in the duct (mm) | Order unit |
|---|---|---|---|---|---|---|
| 80216 | MD1 FttH 4×12,5mm / 1x20mm | 1x 14mm 2x 4mm – 8mm | 3 | 40mm | 4×12,5mm / 1x20mm | Per piece |
| 80216 | MD1 FttH 4×12,5mm / 1x20mm | 1x 14mm 2x 10mm – 12mm | 3 | 50mm | 4×12,5mm / 1x20mm | Per piece |
| 80216 | MD1 FttH 4×12,5mm / 1x20mm | 1x 16mm 2x 4mm – 8mm | 3 | 40mm | 4×12,5mm / 1x20mm | Per piece |
| 80216 | MD1 FttH 4×12,5mm / 1x20mm | 1x 16mm 2x 10mm – 12mm | 3 | 50mm | 4×12,5mm / 1x20mm | Per piece |
| 80216 | MD1 FttH 4×12,5mm / 1x20mm | 1x 18mm 2x 4mm – 8mm | 3 | 40mm | 4×12,5mm / 1x20mm | Per piece |
| 80216 | MD1 FttH 4×12,5mm / 1x20mm | 1x 18mm 2x 10mm – 12mm | 3 | 50mm | 4×12,5mm / 1x20mm | Per piece |
| 80216 | MD1 FttH 4×12,5mm / 1x20mm | 1x 20mm 2x 4mm – 8mm | 3 | 40mm | 4×12,5mm / 1x20mm | Per piece |
| 80216 | MD1 FttH 4×12,5mm / 1x20mm | 1x 20mm 2x 10mm – 12mm | 3 | 50mm | 4×12,5mm / 1x20mm | Per piece |
- Universal, suitable for a maximum of 4 micro ducts and cables
- Expansion along the borehole and on the outer wall guarantees an excellent seal
- Tested 2.0 bar Gas & Watertight
- Quick installation in minutes, no special tools required
- No extensive core drilling necessary
- Also suitable for angled penetrations
- Suitable for sealing holes in the most common wall types according to DIN 18533 and walls made from WU-Concrete, load class 1 and 2 (Watertight pressure 2,0 bar)
- Complies with DIN 18322 underground cable laying works: cable and conduit entries into buildings are to be made watertight and gastight
- High mechanical strength, resists ground movement, shocks and vibrations
- Supplied as one complete kit for sealing of one house connection
- Over 30 years of practical experience, installed in many Telecom / FO network
Set contents
MD1-FttH 4×4-8mm
Item nr. 80217
- MD1-FttH cap
- Anchoring pin (small)
- 2K mixing pouch 101gr., PU resin type 2234
- Opening nozzle
- Gloves
- Abrasive cloth
MD1-FttH 4×12,5 / 1x20mm
Item nr. 80216
- MD1-FttH cap
- Anchoring pin (large)
- 2K mixing pouch129gr., PU resin type 2234
- Opening nozzle
- Gloves
- Abrasive cloth
SET – MD1-FttH + FttH entry 90° for 2x7mm
Item nr. 80217.2
- FttH entry 90° 1×10-12/2x7mm
- MD1-FttH cap
- Anchoring pin (small)
- 2K mixing pouch 101gr., PU resin type 2234
- Opening nozzle
- Gloves
- Abrasive cloth
| Dimensions Cap | ||
|---|---|---|
| Outer diameter | Inner diameter | Height |
| 132mm | 106mm | 30mm |
| Specifications expanding resin | ||
|---|---|---|
| Properties | Unit | Value |
| Start time expansion | seconds | > 95 |
| End time expansion | minutes | 15 |
| Compressive strength | N / cm² | > 100 |
| Gas and water tightness 1,0bar | 30 days | no leakage |
| Gas and water tightness 2,0bar | 24 hours | no leakage |
| Volume consistency | cube 10 x 10cm | no change |
| Temperature cycles, -20º tot +40ºC | 10 consecutive cycles | no leakage |
| Vibration test 10 Hz/amplitude 3mm | 240 hours | no leakage |
| Axial tensile force | diameter x 10 N | no leakage |
| Resistance to bending | cables 45º in 2 directions >250mm | no leakage |
| Expansion polyurethane foam in pipe | cm | <40 |
| Temperature resistance | ºC | +120 |
| Chemical resistance | ||
|---|---|---|
| Properties | Unit | Value |
| 0,1N Na₂SO₄ | 30 days | no degradation |
| 0,1N NaCl | 30 days | no degradation |
| 0,1N H₂SO₄ | 30 days | no degradation |
| 0,1N NaOH | 30 days | no degradation |
| Diesel | 30 days | no degradation |
| Gasonline | 30 days | no degradation |
| Resistance | ||
|---|---|---|
| Properties | Unit | Value |
| Molds | good | |
| Rodents | good | |
| Shelf life | months | minimal 30 |
Assembly Instructions
80216 – MD1-FttH 4×12,5 / 1x20mm
80217.2 – MD1-FttH + 90° entry 2x7mm
Material Safety Data Sheet (MSDS)
FILOform’s safety data sheets are currently not available online. Via our contact page you can request the required safety data sheet from our sales department.
Get in touch
Can we help simplify your cable and ducting infrastructure solution? Connect with our team today for more information and support.